Gummi rolling is when a banding machine applies a rubber or plastic sheet to a paper or cloth strip. The machine uses pressure and friction to create the desired shape. Many factors can affect gummi rollings, such as the banding machine’s speed, tension, and roller size. This article will explore changing the gummi roller on an ats banding machine. By doing so, you will be able to maintain the quality of your product and keep it running at its best.
Materials needed
Materials needed:
-Gummi roller
-1/4 inch hex key
-1/4 inch Allen wrench
– Hammer
– Wrench set
– Light-duty grease or oil
– WD40
Procedure
If your gummi roller is not working, it may be time to replace it. Follow these steps to change the gummi roller on an ats banding machine:
1. First, remove the cover from the machine by unscrewing the four screws on top of the cover.
2. Remove the old gummi roller by pulling it out of the machine. It should come out easily with some force.
3. Third, install the new gummi roller by pushing it into place and screwing in the four screws that were previously removed. Make sure that it is properly seated before screwing in these screws.
4. Finally, reattach the cover to the machine by screwing it back in place
Tips and Warnings
When it comes to changing the gummi roller on its banding machine, there are a few things that you need to keep in mind. First and foremost, wear appropriate safety equipment, including gloves and eye protection. Second, ensure the machine is properly unplugged before beginning the installation. Third, use the correct type of replacement gummi roller for your machine. Fourth, follow the specific instructions provided by the manufacturer of your banding machine for changing the gummi roller. Finally, be patient and take your time installing the new roller, ensuring that the machine operates smoothly and error-free.
English 
Spanish 
Portuguese